产品中心
Home > Product > Copper Aluminum Profile Processing Series > Industrial Aluminum Profile Accessories

    Industrial Aluminum Profile Accessories

  • Category:
    Copper Aluminum Profile Processing Series
  • Browse number:
    32
  • Release time:
    2024-05-24 09:50:53
  • Share:
  • INQUIRY

There are many categories of aluminum profile accessories, and there are also many materials for accessories, such as nylon, PVC, aluminum alloy, steel nickel plating, spray coating, etc. Among them, spray coating is more expensive, followed by aluminum alloy, and the cheaper ones are nylon or PVC. In short, the main factors affecting the price of aluminum profile accessories are material and type.

There are too many accessories available for industrial aluminum profiles, and many users often don't know which accessories to choose for connection and fixation? Actually, a good way is to look at which accessories are used more frequently, and basically follow the selection without making mistakes. So which accessories are commonly used in industrial aluminum profiles? Below, the editor will provide a brief introduction to 6 major series.

1、 Bolt series.

The bolt series mainly uses hexagonal bolts, which can not only be used to fix profiles, but also be used with nuts as fasteners. Therefore, in many cases, hexagonal bolts are essential. The common usage method is to vertically drill holes to connect and fix two profiles, or use them with slider nut accessories to fix corner pieces, corner brackets, handles, hinges, and so on.

2、 Nut series.

The nut series mainly uses slider nuts and T-nuts. These two types of nuts can only be used with bolts, usually equipped with internal hexagonal bolts to fix corner pieces, right angles, hinges, handles, etc. However, these two nuts, one belongs to the rear nut and the other belongs to the front nut. The slider nut belongs to the front nut, and it needs to be placed in the groove of the profile before the frame installation. T-nuts belong to rear nuts and can be installed after the frame is installed. In terms of installation convenience, T-nuts are more convenient to install than slide nuts.

3、 Connection series.

The connectors are divided into two categories: external connectors and internal connectors. The most commonly used external connectors are corner pieces and corner brackets, which have good load-bearing capacity, simple and convenient installation, and are suitable for connecting and fixing the vast majority of frame structures. The commonly used internal connectors are hexagonal bolts and built-in connectors. Hexagonal bolts have good load-bearing capacity, and built-in connectors are suitable for connecting and fixing large-sized profiles.


Comment

(0)
*Captcha:

ONLINE MESSAGE

*Subject:
*E-mail:
Phone:
Address:
*Captcha:

RELATED PRODUCTS